020P, the LEDs will illuminate to indicate
the keypad is
ready for operation.
Please first install the keyboard
interface driver (in the
KBIDrv folder) and follow by PKB20P
utility.
In case of the KBIDrv installation is done
more than one
time, the newer installment will
automatically remove the
previous installment.
Follow the dialog boxes of the utility to
do the necessary
programming/setting to meet your
applications. The
transmission task is needed after
programming /setting is
done. Before executing transmission,
must first connect the
PKB-020P to keyboard port (disconnect and
replace the PC
keyboard).
After transmission is completely done,
disconnect the PKB-
020 cable from PC and attach the USB
adapting cable to the
PKB-020P and link it to the computer via
USB port.
The utility is only good for Windows
2000, XP and NT
operation systems.
It is strongly suggested that power off
computer when
disconnect or connect the keyboard/keypad
to keyboard port.
Power on the computer after the proper
connection of
keypad to PC is made. In normal case, the
LEDs will
illuminate to indicate the keypad is
ready for operation.
It is not necessary to power off computer
to attach the
keypad to USB port. . In case of carrying
on
programming/setting job, it is necessary
to disconnect the
USB adapting cable and join keypad cable
to PC keyboard
port for transmission. After performing
transmission, link the
USB adapting cable back to keypad and
attach it to USB port)
4.3) Installation for USB interface model:
4
5
PKB-020P
Max. 20 characters programmable
for each key
1.
Unpacking...................................................................
1
2. PKB-020P series
overview.......................................... 1
3.
Operations...................................................................
3
4.
Installations..................................................................
4
Index
4. Installations of POS
Programmable Keyboard
4.1) Installation for keyboard interface
model:
4.2) Installation for RS-232 interface
model:
Please first install the keyboard interface driver (in the
KBIDrv folder) and follow by PKB20
utility.
In case of the KBIDrv installation is
done more than one
time, the newer installment will
automatically remove the
previous installment.
Follow the PKB20P utility's dialog boxes
to do the
necessary programming/setting to meet
your applications.
Transmission task to PKB-020P is needed
after
programming/setting is done.
Before executing the transmission, must
first connect the
PKB-020P to PC keyboard port (disconnect
and replace the
PC keyboard).
The utility is only good for Windows
2000, XP and NT
operation systems.
It is strongly suggested that power off
computer when
disconnect or connect the
keyboard/keypad. Power on
computer after proper connection of the
keypad to PC is
made. In normal case, the LEDs will
illuminate to indicate
the PKB-020P is ready for operation.
Please install the PKB20P utility and
follow the dialog
boxes to do the necessary
programming/setting to meet
your applications. The transmission task
is needed after
programming/setting is done,
Before executing the transmission, must
first connect the
PKB-020P to RS-232 port. COM 1 is
default.
Apply proper power adapter to the power
jack of the DSUB
9 pin connector of the keypad, or a
special made pin out of
the connector to retrieve the DC power
from the keyboard
port on the PC/host.
The utility is only good for Windows
2000, XP and NT
operation systems and USB mouse.
It is strongly suggested that power off
computer when
connect or disconnect the PKB-020P to
RS-232 port.
When turn on the computer and power
adapter of the PKB-
POS Programmable Keypad
AC power
source
RS-232 port
to PC Keyboard port
USB port
