Page Index:
1
2
3
4
5
6
7
Download:
PDF Manual
|
Java Based Setup Utility |
Latest Firmware Patch
|
Virtual COM Port Driver
See Also:
eCOV-100 Basic Model.,
eCOV-132X Box Model, and eCOV-432
Server Model
Serial-Ethernet Converter FAQ
Barcode Scanner | Magstripe Card
Reader / Writer
|
POS Customer Display |
POS Keyboard
Touchscreen POS System | Cash Drawer
|
Serial-Ethernet Converter |
Receipt
Printer
2.3.3 Refresh
Rate
The “Refresh Rate” function is the optional
function to change how many seconds to refresh the
main menu of the “Monitor” function. The first
time default value of “Refresh Rate” is 2
seconds.
2.4.“Exit” function
Exit the SeManager utility.
3. Web
Console
The Host PC needs to be in the same IP subnet
with eCOV-110, otherwise it is unable to show
the Web Console screen. Possible reasons for
different subnet between the unit and Host:
(1) Setup
through WAN: Will need to setup though gateway of the Host PC to connect with
eCOV-110
(2) eCOV-110
with factory default setting: In the LAN, the eCOV-110 with default factory
setting IP address might be in different
subnet than the Host PC’s IP address range (e.g.
eCOV-110 IP 192.168.2.127, Host
PC:192.168.1.x) . Please use “SeManager” (refer to
Section 3) to change the IP address of
eCOV-110, or you may change the Host PC’s IP
address to be in the same IP subnet with
eCOV-110 and make sure both IP addresses are
unique.
3.1.Web Configuration Page: Input the
selected eCOV-110 IP address on your web browser (IE,
Netscape).
3.2.Change Settings
Ø Please
refer to section 2.2 for each parameter’s description.
Ø Change
Network Settings
Ø Change
Serial Settings
Ø Change
Operating Settings
Ø Change
TCP Transmit Timeout parameter (TCP Connection)
Ø Change
Data Packing Value
