-15-
-14-
9. Audible & Visual Indicators
and Operation:
9.1. Audible indicators (Scanner)
·
·
Bluetooth radio link status by pushing and holding
trigger
Bluetooth radio link status by plug in / disconnecting
power device
5-ascending tone beep
5-descending tone beep
No response
Indications: Indicates the Bluetooth radio link set to on.
Operation:
At Bluetooth radio link off state, by
pushing and holding trigger for over 5
seconds.
Indications: Indicates the Bluetooth radio link set to off.
Operation:
At Bluetooth radio link on state, by
pushing and holding trigger for over 5
seconds.
Indications: Indicates the Bluetooth radio link set to on.
Operation:
By plugging USB retrieving power cable
or external power adapter cable into
scanner's DC jack.
Indications: Indicates the Bluetooth radio link set to off.
Operation:
By disconnecting USB retrieving power
cable or external power adapter cable from
scanner's DC jack.
Indications: Indicates barcode good read and transmit
scanned data successfully to receiver.
Operation:
Operate scanner to read a barcode.
Indications: Indicates barcode good read but transmit
scanned data failed to receiver.
The scanned data will be stored in the
memory.
Operation:
Operate scanner to read a barcode.
No response
1 beep + 1 beep
1 beep + 3 beep
· Good read and transmits
-17-
-16-
·
·
Low power status
Memory full status
2 beeps before scanner emits the red light
1 beep + 1 beep + 2 beeps
1 beep + 3 beeps + 2 beeps
Indications: Indicates the scanner is at low power state.
Operation:
Operate scanner to read a barcode.
It is approximately 250 scans to the scanner shut
itself down since the low power status starts
warning.
Indications: Indicates barcode good read and transmit
scanned data successfully to receiver, the
scanned data will be stored in the memory
and notices the memory is at near full state.
(Recapture mode)
Operation:
Operate scanner to read a barcode.
Indications: Indicates barcode good read but transmit
scanned data failed to receiver, the
scanned data will be stored in the memory
and notices the memory is at near full state
(Recapture mode, or possibly Batch mode)
Operation:
Operate scanner to read a barcode.
Note:
Note:
·
·
·
Whenever the free memory available less than to 4
KB, the memory full status starts warning.
BT series offer 192KB memory for keeping data.
It is roughly stored EAN 13 barcode up to 15,000
scans.
Indications: Indicates scanner has programmed
successfully.
Operation:
Refer to user's manual part 7.
Scanner Programming.
Indications: Indicates scanner's memory has been
purged successfully.
Operation:
Refer to user's manual part 8.
Purge scanner data from scanner.
Programming to be done successfully
Purge scanned data from scanner
10 tone beeps
6 tone beeps
·
