|
BT-100 Series User's Manual
Install the receiver of BT-100
BT-100-□-K:
keyboard wedge interface
-
Turn off the host PC, or the
POS terminal.
-
Disconnect the keyboard
cable from the host PC.
-
Connect the keyboard cable
to the female 6-pin DIN connector of the receiver.
-
Connect
the short cable of the receiver to the keyboard port on the host PC.
-
Turn on the host PC.
BT-100-□-R:
RS-232 interface
 |
PS/2 power retrieving
cable
-
Turn off the host
PC, or the POS
terminal.
-
Plug the female
D-type 9-pin connector of the receiver into an available COM
port on the host PC.
-
Disconnect the
keyboard cable from the keyboard port.
-
Connect the PS/2
power retrieving cable to the keyboard port on the host PC.
-
Connect the keyboard
cable to the female 6-pin DIN connector of the PS/2 power
retrieving cable.
-
Connect the DC plug
to the DC jack on the female D-type 9-pin connector.
- Turn
on the host PC
|
|
External power adapter
(Option)
|
 |
BT-100-□-UR
(USB to RS-232) & BT-100-□-UK
(USB to Keyboard)
 |
Install the USB driver
for BT-100-UR in the support CD if there’s no pre-installed USB
driver.
|
Next : Recharge & Setting Application
POS System Index :
12.1" CubicPOS |
15" CubicPOS |
Barebone POS Unit |
TFT Touchscreen POS Monitor |
9" CRT Mono.
POS Terminal FAQ |
TYSSO Product Links:
Barcode Scanner
| Magstripe Card Reader / Writer |
POS Customer Display |
POS Keyboard
Touchscreen POS System |
Cash Drawer |
Serial-Ethernet Converter |
Receipt Printer
| | 
