POS-7000 User's Manual

Home > About Us > Products > BT-100 > User's Manual

BT-100 Series User's Manual

4. Recharge

BT-100/101 can be charged via USB cable or the external power adapter no matter the power switch is set to on or off. Charging starts as the green LED turns steady on, and is complete as the green LED turns off. Full recharge takes about 4 hours when BT-100/101 is powered off. The device can work as usual during charging

Via USB Port

Connect the DC plug of the USB power retrieving cable to BT-100/101’s DC jack, and connect the USB A type connector to the PC’s USB port

Via External Power Adapter (Optional)

Connect the DC plug of the cable to BT-100/101’s DC jack, and plug the power adaptor into an AC outlet

5. Setting Application

Ensure the Bluetooth radio link between BT-100 and the receiver is built. After setting changes are made, execute “Transmit” to save the configurations to BT-100

Install & Login Application

Insert the support CD into the computer and open the subfolder “BT-100.”
Double click the file “setup” and follow the given instructions to complete the installation.
Execute Start > All programs > BT100 > BT100 to login the utility. Select the interface as per the interface type and press “OK.” Improper interface selection will lead to transmit failure

Main Menu

File menu contains 4 items: Default, Open, Save, and Exit.

Default: Reset all configurable parameters to the default values.

Open: Open the existing configuration file.

Save: Save the current setting to file.

Exit: Exit and close the application

Setting

Press “Accept” after making settings

Keyboard language

There are “US” and “ALT Mode” selectable for keyboard interface

General Parameter

Select “Lower Case” (default) when the Caps Lock is off. Select “Upper Case when the Caps Lock is on. While “Universal” is selected, the Caps Lock status will be automatically detected

Terminator

Terminator is the code attached to the end of each barcode data. The configuration here is for BT-100 only. Note that setting the scanner’s terminator to “CR” is necessary for BT-100’s data processing. Please set the scanner’s terminator as “CR” by its manual. Set the receiver’s terminator to “CR” if the application demands.

Preamble & Postamble

Setting Preamble/Postamble allows adding a prefix/suffix to each barcode.

Transmit

Executing Transmit is required after making any changes to save the configurations to BT-100.

Selecting the proper COM port number is necessary with the RS-232/USB232 interface receiver. Execute Start > Control Panel > System > Hardware > Device Manager > Ports (Com & LPT) to identify the port number.

Next : Open-Pair Setting

POS System Index : 12.1" CubicPOS | 15" CubicPOS | Barebone POS Unit | TFT Touchscreen POS Monitor | 9" CRT Mono.

POS Terminal FAQ | TYSSO Product Links: