SPECIFICATION
MAGNETIC
CARD READER
(OUTPUT SIGNAL LEVEL：TTL)
MODEL：
(THIS
SPECIFICSTION IS SUBJECT TO CHANGE WITHOUT ANY PRIOR NOTICE)
CONTENTS
1.GENERAL
-------------------------------------------------------PAGE 3
2.FEATURES
------------------------------------------------------PAGE 3
3.GENERAL SPECIFICATION
---------------------------------PAGE 3
4.OUTPUT CHARACTERISTICS
------------------------------PAGE 5
5.PIN ASSIGNMENT FOR TYSSO MCR SERIES (TTL) --PAGE 6
6.MCR-SIGNAL TIMING CHART -------------------------------PAGE 7
7.SLOT HOUSING DIMENSION：10cm
Length---------------PAGE 8
SLOT
HOUSING DIMENSION：9.0cm
Length--------------PAGE 9
SLOT HOUSING DIMENSION：43mm
Length--------------PAGE10
1. GENERAL
This specification describes the MCR magnetic
stripe card reader, which reads magnetically encoded data on a magnetic stripe
card conforming to ISO 7811.
2.
FEATURES
l
Small size
l
Light weight
l
High Performance
l
High Reliability
l
Single, dual and three track
model
3.
GENERAL SPECIFICATIONS
3.1 FUNCTION
(1) Card feed：Bi –
direction
(2) Read/Write：Read
only
3.2 BASIC PERFORMANCE
(1)
Card operating speed：5-60 in/sec.
(2) Dielectric strength：DC 250 V
for 1 minute (Between P.C.B ground and mounting screws)
(3) Insulation resistance：10 MΩ Min. at DC 250 V (Between P.C.B ground and mounting screws)
3.3 ENVIRONMENT REQUIREMENTS
(1) Operating Temperature ：-20 ∼ 60 ℃
(2) Conservation Temperature：-30 ∼70 ℃
(3) Operating Humidity ：10 to 95 % RH
(4) Conservation Humidity ：10 to 95 % RH
(5) Vibration：10 to 50
Hz, 2mm Full amplitude in x,y,z directions, respectively for 30 minutes
(6) Shock durability：30G
3.4 POWER REQUIRED
Single track | Dual track | Three track | |
Models | MCR-001/002/003 | MCR-012/023 | MCR-123 |
Voltage | 5V DC + 10% | 5V DC + 5% | 5V DC + 5% |
Comsumption | 2.5 mA | 4.7 mA | 7.0 mA |
Ripple | 100 mVp-p | 100 mVp-p | 100 mVp-p |
3.5 SERVICE LIFE AND ERROR RATE
(An indoor condition by continuous running)
(1) Life of head：Approx.
300,000 passes
(1,000,000 passes head is upon request)
(2) Error rate：Less
than 0.5%
3.6 STANDARD CARD DATA INFORMATION
Card Satandard | IATA | THRIFT | |
Track Used | Track 1 | Track 2 | Track 3 |
Recording Method | F2F (FM) | F2F (FM) | F2F (FM) |
Recording Density | 210 BPI | 75 BPI | 210 BPI |
Recording Capacity | 79 Characters (7-bit code) | 40 Characters (5-bit code) | 107 Characters (5-bit code) |
IATA：International Air Transportation Association Standard
ABA：American
Banker Association Standard
THRIFT：Thrift Industry
4. OUTPUT CHARACTERISTICS
PARAMETER | SYMBOL | CONDITIONS | MIN. | MAX. |
H – Level Output Voltage | VOH | VDD = Min. IOH = -1mA | VDD – 0.4 (V) | |
L – Level Output Voltage | VOL | VDD = Min. IOL = 2mA | VSS + 0.4 (V) |
Magstripe Product Index:
Swipe Card Reader |
ISO & JIS-II combo | Dual Side | Barcode Magstripe Combo | Encoder | OEM Module | Portable Magstripe
| FAQ
TYSSO Product Links:
Barcode Scanner | Magstripe Card Reader / Writer |
POS Customer Display |
POS Keyboard
Touchscreen POS System | Cash Drawer |
Serial-Ethernet Converter | Links to Other Sites