TYSSO MSE-630 Magnetic Stripe Card Encoder Manual

4 5 MSE-630A 1. Introduction.......................................................... 1 2. Installation............................................................ 1 3. MSE Utility........................................................... 2 4. Specifications........................................................ 3 5. Command Set........................................................ 4 6. Sample Program.................................................... 5 Index High/Low Coercivity Tracks 1&2&3 Magstripe Card Encoder 5. Command Set Command Functional Description Remark Code Hex 7F Warm Reset Hex 1B Abort Hex 4D Red LED On Hex 6D Red LED Off Hex 4C Green LED On Hex 6C Green LED Off Hex 28 Yellow LED On Hex 29 Yellow LED Off Hex 59 Buzzer On Hex 79 Buzzer Off Hex 50 Arm to Read Hex 51 Read T1, Standard T1 Format Hex 52 Read T2, Standard T2 Format Hex 53 Read T3, Standard T3 Format Hex 71 Read T1, Non-Standard Track Format 1 Parameter Hex 72 Read T2, Non-Standard Track Format 1 Parameter Hex 73 Read T3, Non-Standard Track Format 1 Parameter Hex 55 Read T1, Custom Data Format 1 Parameter (5, 6, or 7 Bits) Hex 56 Read T2, Custom Data Format 1 Parameter (5, 6, or 7 Bits) Hex 57 Read T3, Custom Data Format 1 Parameter (5, 6, or 7 Bits) Hex 40 Arm to Write with RAW Hex 41 Write T1, Standard T1 Format Hex 42 Write T2, Standard T2 Format Hex 43 Write T3, Standard T3 Format Hex 61 Write T1, Non-Standard Track Format 1 Parameter Hex 62 Write T2, Non-Standard Track Format 1 Parameter Hex 63 Write T3, Non-Standard Track Format 1 Parameter Hex 45 Write T1, Custom Data Format 1 Parameter (5, 6, or 7 Bits) Hex 46 Write T2, Custom Data Format 1 Parameter (5, 6, or 7 Bits) Hex 47 Write T3, Custom Data Format 1 Parameter (5, 6, or 7 Bits) Hex 3B Set Write Density for Specified Track 2 Parameters Hex 4F Set 210 BPI for T1&T3 Hex 6F Set 75 BPI for T1&T3 Hex 4E Set 210 BPI for T2 Hex 6E Set 75 BPI for T2 Hex 77 Set BPC for T1&T2&T3 3 Parameters Hex 7B Set Hi-Co Hex 7C Set Lo-Co Hex 5D Arm to Erase Hex 5A Erase T1 Hex 5B Erase T2 Hex 5C Erase T3 Miscellaneous Commands: Read Commands: Write Commands: Erase Commands: 6. Sample Program The following code fragment demonstrates how to encode 7BPC data on track 3. (Communications Setup) MSComm1.Output ="c" & "1" mStart = Timer Do While MSComm1.InBufferCount = 0 DoEvents If Timer - mStart > 1 Then MsgBox "Device time out" Exit Sub End If Loop buf = MSComm1.Input If buf = "^" Then MSComm1.Output = T3 & Chr(&H4) mStart = Timer Do While Timer - mStart < 0.5 DoEvents Loop buf = MSComm1.Input If buf = "^" Then buf = MSComm1.Input buf = MSComm1.Input MSComm1.Output = "@" mStart = Timer Do While MSComm1.Input <> "^" DoEvents If Timer - mStart > 0.3 Then Command1_Click Exit Sub End If Loop Do While MSComm1.Input <> "^" DoEvents Loop MsgBox "O.K." Else MsgBox "Transmit Data Error", vbCritical End If Else MsgBox "Can't Excute", vbCritical End If If MSComm1.PortOpen = True Then MSComm1.PortOpen = False MSComm1.CommPort = 1 MSComm1.Settings = "9600,o,7,1" MSComm1.PortOpen = True Dim T3 as String T3 = "ENCODE 7-BIT DATA ON TRACK3" Initialization Build Track Record Issue Write Command

Next Page >>

PDF Version | Product Specifications | Operation Guide | Software Utility

Home | Products | Contact