To RS-232 port
AC power
Source
Extension
RS-232 Cable
-5-
-4-
2. Installation
A. RS-232
Connection:
Step 1: Turn
computer system power
off
.
Step 2: Connect the Display Cable to the
RS-232 Port of the
computer.
Step 3: Proper set the connection between
the bundled Power
kit and the Switch power supply inside
the computer or
connecting the DC power source by the
appropriate
DC power Adapter.
Step 4: Turn on the computer, the Display
will be and ready
for receiving data.
B.
Pass-through Connection:
1. Power off the computer, printer and
display.
2. Please refer to the interface section
of the manual for
detailed information of the cable, and
make proper
connection to appropriate ports of the
devices.
3. Power on the computer, printer and
display.
4. The devices are ready for working.
All the data transmitted from Host will
be processed
by peripheral device selection command,
then
transmit the data to the proper devices,
either the
printer or the display.
Note:
Transmit data from host
Interface conversion
Transmit data from printer
for
data
printer
"ON"
