-11-
-10-
5. RS-232 Setting (VFD-700
by DIP switch )
Before running the bundled RS-232 setting
software, please
note following default values:
Com port:
1
Baud rate:
9600
Parity:
none
Data bit:
8
1. Insert the bundled CD disk into the
CD-ROM drive
2. Run "your CD-ROM\Configuration_
Utilities\Customer
Display Series\VFD Series\VFD660_460\setup.exe"
3. Follow the installation hints until
the installation process
is fully completed.
4. Go "start menu" > "programs" > "VFD
Setting"> "VFD-
660_460" to begin the customer display
configuration.
A "OK" message box will be shown on the
monitor.
Click it or press "enter" at the
keyboard, then, the Display's
content will be cleared.
A "device timeout" message box will be
shown on the
monitor. Please do the configuration
again or consult with
your supplier for further assistance.
When configuration is successfully done:
When configuration isn't successfully
done:
6. ESC/POS Commands List
Command Code description
Function description
(decimal)
BS
8
move cursor left
HT
9
move cursor right
LF
10
move cursor down
US LF
31 10
move cursor up
HOM
11
move cursor to home position
CR
13
move cursor to left-most position
US CR
31 13
move cursor to right-most position
US B
31 66
move cursor to bottom position
US $
31 36 n m
move cursor to specified position
1 n 20 m=1 or 2
CLR
12
clear display screen
CAN
24
clear cursor line
ESC =
27 61 n
select peripheral device
0 n 255
ESC @
27 64
initialize display
ESC %
27 37 n
select/cancel user-defined character set
1 n 3
ESC &
273 8sbm s= 1
define user-defined character set
32 n m 126
0 a 5
0 p1... psx a 255
ESC ?
27 63 n
cancel user-defined characters
32 n 126
ESC R
27 82 n
select an international character set
0 n 13
ESC t
27 116 n
select character code table
0 n 5, 16,17,
18,19, 254, 255
ESC W
27 87 n m(x1 y x2 t2)
select/cancel window range
1 n 4
M=0, 1, 48, 49
1 x 1 x2 20
< <
< <
< <
< <
<
< <
<
<
< <
< <
< <
< <
< <
<
