6.2.7. Select the Command Mode
6.2.8. Set all default
6.2.9. Select the drive ON/OFF setting
COMMAND: M
COMPUTER: EOT SOH
'M' 'Mode'
ETB
ASCII (04H) (01H) (4DH)(30H~38H) (17H)
Byte 1
1 1
1 1
DISPLAY: ACK
(or NACK if failed)
ASCII (06H)
(15H)
Byte
1 1
COMMAND: X
COMPUTER: EOT SOH
'X' ETB
ASCII (04H) (01H) (58H) (17H)
Byte 1
1 1
1
COMPUTER: ESC
'G'
ASCII (1BH) (47H)
Byte 1
1
Note:
(This command feature is for Y cable
printer pass-
through connection only.)
PRINTER ON COMMAND:
PRINTER OFF COMMAND:
COMPUTER: ESC
'S'
ASCII (1BH) (53H)
Byte 1
1
Note: The driver feature mode selections
are as
following:
a. PRINTER ON COMMAND (Format as above)
features PRINTER ON and DISPLAY OFF
b. PRINTER OFF COMMAND (Format as above)
features PRINTER OFF and DISPLAY ON
Each ASCII character is transmitted with
1 start bit
8 data bits
1 stop bit
No parity
Note: You may generate your own
application software to
run the display according to the standard
RS-232C
communication protocols and the SOFTWARE
CONTROL information listed on this
chapter.
6.3. Transmission method
-21-
-20-
30H : VFD-450/550
31H : EPSON ESC/POS
32H : UTC/S
33H : UTC/E
34H : AEDEX
35H : ICD 2002
36H : CD 5220
37H : DSP-800
38H : ADM 787/788
Command Modes Selection
Page Index: 1
2 3
4 5
6 7
8 9
10 11
12
13 14
15 16
17 18
19 >
Download PDF version
::
Customer Display FAQ
:: Specifications ::
Software Download
Customer Display
Index: VFD
| LCD |
Arabic & Chinese Display |
Double Side Display
TYSSO Product Links:
Barcode Scanner |
Magstripe Card Reader
/ Writer |
POS Customer Display |
POS Keyboard
Touchscreen POS System
| Cash Drawer |
Serial-Ethernet
Converter | Links to Other Sites
Home
| Contact
