-22-
5. Then, follow this menu to run the demo
software.
a. Click "Set COM Port and Baud Rate", to
set
RS-232 communication of the computer.
Select
COM port, baud rate must also be set as
the
same as the baud rate shown on the lower
line
of the display, such as "9600 N 8 1" means
baud rate 9600, no parity, 8 data bits,
and 1
stop bit.
b. Click "International Character Set" to
select
International character Code Set.
c. Click "Command Type Select" to select
the
command type that you want the display to
run.
d. Click "Clear Range" to select the
start and end
position that you want to clear.
e. Click "Set Cursor Position" to move
the cursor
position.
f. Click "Save Current View Message" to
save the
current view message into the memory of
Display.
g. Click "Display Demo Message" to
display the
previously saved message.
h. Click "Set All Default" to default the
Display
as it just come from manufacturer.
7. VFD Function Demo
Page Index: 1
2 3
4 5
6 7
8 9
10 11
12 13
14
15 16
17 18
19 >
Download PDF version
::
Customer Display FAQ
:: Specifications ::
Software Download
Customer Display
Index: VFD
| LCD |
Arabic & Chinese Display |
Double Side Display
TYSSO Product Links:
Barcode Scanner |
Magstripe Card Reader
/ Writer |
POS Customer Display |
POS Keyboard
Touchscreen POS System
| Cash Drawer |
Serial-Ethernet
Converter | Links to Other Sites
Home
| Contact
(Windows Version)
Note: For the first installation, you had
better connect
the Display with the COM1 port of the
computer
due to the initial value COM1 for Display
1. Find the enclosed two diskettes.
2. Make sure the installation of Display
is completed.
3. Enter the Windows system to start your
computer.
4. Copy the software of bundled diskettes
from Drive
A: into sub-directory VFD of Hard Drive
C: in
your computer under Windows system, then
execute setup.exe and install the VFD
Function
Utility. After successfully installing,
you can find
VFD file in Program Files, click the VFD
file, you
will see the following screen:
7.1. How to run the demo software
-23-
