Home > Product > POS Terminals > POS System 5700 > User's Manual
 

POS-5700 Series

3. Operating System

The POS System main board is compatible with Windows 95/98/2000/XP and Red Hat Linux 9.0. If the drivers are required, find the necessary files in the support CD. The storage media can be HDD, Compact Flash (CF), or Disk on Module (DOM) depending on different options.

3.1 Install OS by USB CD-ROM

a. Plug the AC power cord of the power adapter to the PWR IN port. Connect an external CD-ROM to the POS system as the figure shown below and insert the installation CD for the Operating System.

 

b. Press the <Delete> key after powering on the system. The system will enter the BIOS Setup Utility.

c. Select “Boot” with the key. Select “Boot Device Priority” with the key and press the <Enter> key.

POS system bios setup utility

d. Select “1st Boot Device” and press the key. Press the key to select “USB: External CD-ROM.” Press the <F10> key to save and exit the setting.

POS terminal bios setup boot utility

e. After the POS system reboots, it will start to install the operating system from the CD.

 

3.2 Adjust POS CPU Fan Mode and Brightness

a.      Press the <Delete> key after powering on the system to enter the BIOS Setup Utility.

b.      Select “Advanced.” Select “Harware Health Configuration” and press the <Enter> key to go to the sub screen.

Point of sale CPU fan and brightness

c.      Select “CPU Fan Mode” and press the <Enter> key. There are 3 modes for options:

Full On mode makes the CPU fan run at its full speed.

Automatic mode is not available.

PWN Manually mode enables the users to adjust the CPU fan by entering a number between 20~127. The higher the value, the higher the speed will be.

 

Point of sale advanced setting

Point of sale hardware configuration

d.      Select “PWM Duty control.” Adjust the brightness by entering a number ranges from Min 20 to Max 127. The higher the value, the brighter the screen will be.

pos all in one bios setup utility

e.      After configuring the setting, press the <F10> key to save and exit the setting. The system will reboot automatically.

 


        Other POS Terminals
 

       

 

   
Point Of Sale 5000   Point Of Sale 5700

Point Of Sale 7000


CCD | Laser Gun | Fixed Reader | Wands | Slot Reader  | OEM Modules | Portable | Decoder & Accessories | Omnidirectional

Barcode Scanner | Magstripe Card Reader / Writer | POS Customer Display  |  POS Keyboard | Touchscreen POS System
Cash Drawer | Serial-Ethernet Converter | Receipt Printer

 

 
Copyright 2008 Fametech Inc.(Tysso)                                                                                              Home | Products | Contact

CCD Barcode ScannersMagnetic Stripe Card ReadersReceipt PrintersSerial-Ethernet Converter