TYSSO Programmable POS Keyboard

-16- -17- After finish the settings you like, you can press "Update" button to send these settings to the keyboard and then the dialogue window will be automatically closed. Or you can press "OK" button to save the setting in the program memory and then the dialogue window will be automatically closed. If you choose "Repeat Enable" option and you assign non layer index for certain key lock position, for example, assigning "Hello" for key lock L. When the key is switched on L position, "Hello" will be generated repeatedly. If you choose "Beep Enable" at the same time, you will hear a continuous beep sound. Therefore, it is recommended the key lock be assigned a layer index. Caution: 4. Magstripe Card Reader Setting (Optional) On the menu bar, click "Keyboard" and then "Magstripe Card Reader Setting", or on the toolbar click the magstripe card icon, the following dialogue will appear, Header, Separators, and Suffixes can be programmed similar to normal buttons on the keyboard, click on the ASCII or Code to bring up the window for input. According to the settings in the above dialogue window, after sliding a magstripe card along the reader, it will display as follows, Header codes, Track 1 Start Sentinel, Track 1 Data, Track 1 End Sentinel, Separator codes, Track 2 Start Sentinel, Track 2 Data, Track 2 End Sentinel, Separator codes, Track 3 Start Sentinel, Track 3 Data, Track 3 End Sentinel, Suffix codes. After finishing the settings you like, you can press "Update" button to send these settings to the keyboard and then the dialogue window will be automatically closed. Or you can press "OK" button to save the setting in the program memory and then the dialogue window will be automatically closed.

Index | Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12