-11-
-10-
Note: 1. When using the
hexadecimal dump mode, please
set the SW-4 of the DIP switch to OFF.
2. During hexadecimal dumping, any commands do
not function.
3. If no characters correspond to the data received,
the printer prints
.
3) Ending hexadecimal dumping
Hexadecimal dumping ends by turning the power off,
or
pressing the FEED button three times.
<Printing example>
1. To install the PRP-076 driver, please insert
the bundled
CD disk into the CD-ROM drive.
2. In the CD-Rom menu, please go to Driver >
Tysso and
double click the SetupEn.exe file to begin the
driver
installation process and follow the installation
instructions.
3. Please choose the OS that matches with your
computer
system and press Next.
4. Please select PRP-076 Series for Install
Module. For
Printer Port Setting, if you are connecting the
printer to
PC COM ports via RS-232 connection, the FlowControl
must be set to Hardware. Press Finish when you done
all
the setting to end installation.
4.5) Driver Installation
4.3) Printer Self Test
4.4) Hexadecimal Dumping
This is to test whether the printer is working
properly or not
and also checks the printing quality, firmware
version, and DIP
switch settings
1. Hold the FEED button first and then turn on the
power at
the same time, release the button after around 2
seconds.
2. If the printer is working properly, it should
then
automatically print the self-testing result that
indicating the
firmware version number, printer connection type,
English
alphanumeric characters, and few Taiwan fonts.
3. The test print will be ended with the
following message:
*** COMPLETED ***
The above procedure does not test parallel or
serial
ports. Please use communication utility such as
Windows HyperTerminal to test the printer
connection.
1) Hexadecimal Dumping
This function prints the data transmitted from the
host
computer in hexadecimal numbers and in its
corresponding characters.
2) Starting hexadecimal dumping
Turn the power on while pressing the FEED button or
executing GS ( A command. The printer first prints
"Hexadecimal Dump" on paper roll and prints the
received print data in hexadecimal numbers and in
its
corresponding characters.
Note:
Page Index [1] [2]
[3] [4] [5]
[6] [7]
[8] [9] [10]
[11] [12] [13]
[14] [15] [16]
PDF Version
POS Printer Index |
User's Manual |
Specification |
Product Index
Barcode Scanner |
Magstripe Card Reader
/ Writer |
POS Customer
Display |
POS Keyboard
Touchscreen POS System | Cash Drawer
|
Serial-Ethernet Converter | Receipt Printers
