-13-
-12-
Cleaning the Paper Holder
Use a soft cloth to remove paper dust from the paper
holder
and paper transport section.
The paper should not be touched during printing.
Shift the
paper during paper ejection may cause a feed failure
or paper
jam.
he Status LED (Red) on the printer control panel
will flash
with beeps if paper is jammed. Please follow the
below
instruction to remove paper jam.
(a) Switch the printer power off.
(b) Open the printer cover by pushing the
Cover-Open button.
(c) If the printer cover opens, removed the jammed
paper
gently (take care not to touch the printer head.)
And
reinstall the paper roll.
(d) Return the cutter to its home-position and
release or clean
out the jammed paper in inside the front cover.
Open the
top cover, and then reinstall paper roll.
5.3) Preventing Paper Jams
5.4) Fixing Paper Jam
Caution:
Since working on the cutter may be dangerous, be
sure to
turn off the printer first.
Note: Do not apply extreme force to open the front
cover to
prevent damages to the cutter. If the front cover
will
not open properly, please contact your dealer.
5. Safety and Maintenance
5.1) Safety Information
5.2) Periodical Cleaning
1. Do not touch the HEAD of printer with
anything.
2. Do not touch the cutter blade.
3. Only use the power supply that is come along
with the
printer.
4. Do not bend the power cord excessively or
place any
heavy objects onto it.
5. When connecting or disconnecting the plug,
always hold
the plug-not the cord.
6. Keep the desiccant out of children
s reach.
7. Use only approved accessories and do not try
to
disassemble, repair or remodel it for yourself.
8. Do not let water or other foreign objects in
the printer.
9. Install the printer on the stable surface.
-Choose a firm,
level surface where the printer will not be exposed
to
vibration.
10. Do not use the printer when it is out of order.
This can
cause a fire or an electrocution.
11. Do not connect a telephone line into the
peripheral drive
connector.
12. We recommend that you unplug the printer from
the power
outlet whenever you do not plan to use it for long
periods.
Printed characters may become partially unclear due
to
accumulated paper dust and dirt. To prevent such a
problem,
paper dust collected in the paper holder and paper
transport
section and on the surface of the printer head must
be removed
periodically. Such cleaning is recommended to be
carried out
once six month or one million lines.
Page Index [1] [2]
[3] [4] [5]
[6] [7]
[8]
[9] [10] [11]
[12] [13] [14]
[15] [16]
PDF Version
POS Printer Index |
User's Manual |
Specification |
Product Index
Barcode Scanner |
Magstripe Card Reader
/ Writer |
POS Customer
Display |
POS Keyboard
Touchscreen POS System | Cash Drawer
|
Serial-Ethernet Converter | Receipt Printers
