-7-
-6-
3.
3.1) Connecting the
Interface Cable
3.2) Connecting the Receipt Printer to a
Cash Drawer
a. Before connecting/disconnecting the
interface cable,
make sure that power to the printer and
all the devices
connected to the printer is turned off.
b. Connect the interface cable to the
connector on the rear
panel of the printer.
c. In the case of a serial interface,
tighten the connector
screws. In the case of a parallel
interface, fasten the
connector clasps.
Make sure that the printer is turned off
and unplugged from
the AC outlet and that the computer is
turned off before
making connections.
Do not connect a telephone line into the
RJ-11 socket.
Failure to observe this may result in
damage to the printer.
Important:
3.3) Connecting the AC
Adapter
a. Connect the AC power cord to the inlet
of AC adapter,
and then connect the power cord plug to a
suitable
electrical outlet.
b. Connect the adapter cable to power
connector of printer;
make sure the printer power switch is OFF
before making
any connections.
DO NOT USE ANY AC POWER ADAPTERS
OTHER THAN SPECIFIED.
c. Set the power switch as shown. The
POWER LED on the
control panel will light up.
CAUTION:
Receipt Printer
Interface and Connection
Plug the cable connector securely
into the printer's interface connector.
Attach the other end of the
cable to the computer
