-9-
-8-
4. Receipt Printer
Configuration
Printer Control Panel & Status Indication
4.1) Receipt Printer
Status (Red LED)
Red light ON: Indicates that the printer
is online.
Red light OFF: Indicates that the printer
is offline.
Red light flashes: Indicates the printer
error(s) such as out
of paper, paper jammed, or printer cover
is not closed
properly.
4.2) DIP Switch
Settings
4.3) Receipt Printer
Self Test
The DIP switch panel is located at bottom
of the printer as
shown:
Before configure the DIP switch settings,
please first
turn the printer power off and remove the
paper roll.
(*) Baud Rate is only available for
serial interface models.
This is to test whether the printer is
working properly or not
and also checks the printing quality,
firmware version, and
DIP switch settings
1. Hold the ONLINE button first and then
turn on the power
at the same time, release the button
after around 1 second.
2. If the printer is working properly, it
should then
automatically print the self-testing
result that indicating
the firmware version number, printer
connection type,
English alphanumeric characters, and few
Chinese fonts.
3. The test print will be ended with the
following message:
*** COMPLETED ***
The above procedure does not test
parallel or serial
ports. Please use communication utility
such as
Windows Hyper Terminal to test the
printer
connection.
Switch Function
ON OFF Default
1
Baud Rate (*) 38400
19200 OFF
2
Auto Cutter No
Yes OFF
3
Color Deepness Deeper Normal OFF
4
Beep Yes
No OFF
DIP Switch Functions:
Note:
Note:
(Blue LED) The POWER light is on whenever
the printer is on.
(Red LED) This indicates printer
online/offline
status or an error
(Button) Press the FEED button to feed
roll paper.
(Button) Press the ONLINE button to set
printer
ONLINE/OFFLINE
