-13-
-12-
5.4) Fixing Paper Jam
The Status LED (Red) on the printer
control panel will flash
with beeps if paper is jammed. Please
follow the below
instruction to remove paper jam.
a. Switch the printer power off.
b. Open the printer cover by pushing
the Cover-Open lever.
c. If the printer cover opens, removed
the jammed paper gently (
), and reinstall the paper roll.
d.
, please restart the
printer by switching power off/on, and
try again, if the
cover is still unable to open, please
follow the instructions
below:
1) Set the printer power OFF
2) Slide off the front cover to
reveal the auto-cutter
3) Roll the little gear as
shown until the warning
beeps is stopped.
Since working on the cutter may be
dangerous,
be sure to turn off the printer first.
Do not apply extreme force to open the
front cover
to prevent damages to the cutter.
If the front cover will not open
properly, please
contact your dealer.
take care not to touch the
printer head
If the printer cover will not open
Caution:
Note:
e. Return the cutter to its home-position
and release or clean
out the jammed paper inside the front
cover. Open the
printer cover, and then reinstall paper
roll.
(Reinstall Receipt Paper Poll)
(Tear off the receipt paper as shown)
